Fermoy Model Car Club ~ Munster RC Car Club

Any advice welcome.
Ever since ITCS round 2 i have suffered with overheating problems in whatever configuration i run. Brushed/brushless 19turn and 27 turn.
I have an 84 tooth spur and i am running between 25-27 pinion. LRP AI Series ESC on an MI2EC.
In this short space of time i have blown up 2 ESC's and 2 19 turn brushed motors.
Help me!!!!
Rgds Lee.

I wouldn't be sure what it is but i would recomend posting your problen on http://www.rcracechat.co.uk as there is a lot of people on there that know what they are talking about an may be able to help u.......

with 27 turn I would run
84-24

with 19 turn I would drop to 22 or 21 pinion

I would say that is the problem

With my 27 turn i run a

86-26


With my 19 turn i run a

85-27

Hope this helps  :cheers:

86-26 =5.95


85-27 = 5.6666


Sounds a bit too close but
If it works then there you go



:cheers:

Hmmm i just checked there i ended up with a fianl of 5.89 on 19t Plus advanced the motor a tad :)

---