| Fermoy Model Car Club ~ Munster RC Car Club http://fmcc.myfastforum.org/ |
|
| NTC3 & TC3 http://fmcc.myfastforum.org/viewtopic.php?f=24&t=742 |
Page 1 of 1 |
| Author: | daxter35 [ Mon Mar 16, 2009 3:17 pm ] |
| Post subject: | NTC3 & TC3 |
Hi, Apart from the obvious (NITRO), :smt119 are there many diffences between the chassis on the TC3 and NTC3? It is for buying spares, wishbones, driveshafts, hubs etc. Appreciate the info? |
|
| Author: | Graham Kenny [ Mon Mar 16, 2009 4:22 pm ] |
| Post subject: | |
Well things that are very different and cant be used on the TC3 are Chassis,Shocktowers,Drivetrain parts You may find that the only real thing you can use is the steering blocks, C hubs, rear hubs, Susp Arms and screws, thats probably about it |
|
| Author: | x-ray f [ Mon Mar 16, 2009 4:34 pm ] |
| Post subject: | |
Wouldnt the Ntc3 be 200mm Mark rice would sell tis TC3 very cheap for spares :smt002 |
|
| Author: | daxter35 [ Mon Mar 16, 2009 6:11 pm ] |
| Post subject: | |
Cool, thanks lads. |
|
| Author: | MiCk B. [ Mon Mar 16, 2009 11:12 pm ] |
| Post subject: | |
The tc3 is 190mm wide & the NTC3 is 200mm wide. There would not be a lot of carry over parts. The NTC3 is pivot ball suspension, the tc3 is hub carriers. Have a look at these parts images: There is veery little 'carry over' parts between the two kits. TC3: 
NTC3: 
MiCk B. :-) |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|