Fermoy Model Car Club ~ Munster RC Car Club

well i just got it on sunday in boyztoys in stephens green
and first of all i had a little crash and 1 of the things that hold the clips snapped thats fine tapped it up and its alri but today i was running it outside and it stopped all of a sudden and i brought t it back to my garden and took the shell off and the glow plug was gone and i couldnt find it
what should i do???

i saw this on the boyztoys website
http://boyztoys.ie/?0lrWjeYx3Xff0fFp1AF ... NUGqPU0%3D
will i have to get one?if so what do i do to put it on
or what else should i do

as i said it is 2 days old and has been takin out only 3 times
wb asap!!!!                            :smt013  :smt013  :smt013
 :smt009  :smt009  :smt009

Bring it back to boyztoys and they will explain it all to you.
One picture is worth a thousand words. ;)

but can i go out and get the glow plug and put it in and tighten it would it work

Yes,
But where else are you going to get one?
MAKE SURE IT IS THE RIGHT ONE..!!  :smt018

hey i got 1 out of a gx-12 kyosho engine that i got with the nitro racer magazine that was out a few years ago
will that be fine
its starts up but how do i no which 1 to get in the future

http://www.alansmodels.com/main_site/en ... y_gx12.jpg[/url]

Phone bigboyztoys and ask if the one you have now will do.
it might be fine to start it but if it is a hot or cold one it may not suit your engine running temp also might be a mismatch for the % nitro you are running and could blow again leaving bits of the element going round inside the engine resulting in wrecking your new engine.
Also
If it is longer than the original one it could hit the piston crown and do damage
I am not trying to frighten you off here but be careful with nitro engines  :smt012

Are the treads in your engine head ok  :smt011

Maby the plug was just lose to start off with but i cant imagine the engine running great with a lose plug  :smt010

---