Fermoy Model Car Club ~ Munster RC Car Club

Also on Diffs Front should be tight but not Locked an the Back Locked .....

Yep Skinny d we will give u a hand no Prob...  8)

cheers lads .
ye on my yohomo DP plus , u get spools(locked diffs) for front and rear! works well , but then again , I wouldn't know any better because I had the same on  my TT-01.

how bout ye? what do ye have?

Made a couple of small changes before going to the meet today
Car = Associated TC3

Shocks = Tamiya TRF 40wt oil  ~ Springs ?? Not sure. Dark Grey

Height = 4.5 front ~ 5.5 Rear

Toe = Front 0 Deg. ~ Rear 3 Deg \Toe in

Camber = Front -1 Deg ~ Rear 0 Deg

Diffs = Front as good as Locked it. ~ Rear Normal

Tyres = HPI T-Drift.

Shell = Mazda RX7


Was 100% better this week than last time out.
Smooth drifts to both sides.

u locked the front!?? what! but left your rear as normal?(ball diff i take it)
unusual.....

What does the rear toe in do exactlt for the car? my manual says to have my one set like that too , but I dont get why? :?

I set the scubiee us aswell  :wink:
Loads of heineken in the front and a lot more in the back and then give it to someone else to drive it  :lol:  :lol: (good man conor :wink: ) :twisted:

:lol:  :lol:  :lol:  :lol:

It was drifting well even with me behind the wheel
Wait untill your driving then it will drift  :lol:  :lol:

Alans TA05 is set with,
Front camber- 0deg
Rear camber -1deg
Front toe- 0 deg
Rear toe -3deg
Front ball diff- Tight
Rear ball diff- Tight
Front springs- soft
Rear springs - Hard
Car needed weight transfer to stop understeer when entering a corner, but we've put this down to the old drift tyres he's using, a new set of Yokomos have arrived so we'll have to see! But other than that the car ran well. He's new Chaser arrived today so I'm waiting for paint to dry at the moment.

so what does the toe in do exactly?? for front and rear....?

I heard that having soft springs on your rear and hard springs on the front , so basically vice versa to the usual setup , is what you should have to drift......?!! anyone know anything about this . I suppose it does make sense      :?