Fermoy Model Car Club ~ Munster RC Car Club

Hi,
 Apart from the obvious (NITRO),  :smt119 are there many diffences between the chassis on the TC3 and NTC3?
It is for buying spares, wishbones, driveshafts, hubs etc.
Appreciate the info?

Well things that are very different and cant be used on the TC3 are
Chassis,Shocktowers,Drivetrain parts

You may find that the only real thing you can use is the steering blocks, C hubs, rear hubs, Susp Arms and screws, thats probably about it

Wouldnt the Ntc3 be 200mm

Mark rice would sell tis TC3 very cheap for spares  :smt002

Cool, thanks lads.

The tc3 is 190mm wide & the NTC3 is 200mm wide.

There would not be a lot of carry over parts.

The NTC3 is pivot ball suspension, the tc3 is hub carriers.

Have a look at these parts images: There is veery little 'carry over' parts between the two kits.

TC3:




NTC3:




MiCk B. :-)

---